Controls - 50 SK3000 Operator’s Manual
Operator Station Console
10. Medium auxiliary
control
To rotate attachment
forward, move up.
To stop attachment
movement, move to middle.
To rotate attachment in
reverse, move down.
Use this control based on attachment
flow requirements. See “High/Low
auxiliary control” on page 48.
11. Attachment pin control To engage attachment pins,
push down.
To disengage attachment
pins, pull up.
Alarm sounds and pop-up message
appears on display when pins are
disengaged.
12. Ride control/Self-level
switch
To select ride control, press
top.
To select self-level, press
bottom.
When ride control is selected,
machine automatically dampens
loader arms based on ground drive
speed set in display by operator.
If self-level is selected, machine
automatically keeps attachment plate
level when operating.
13. Auxiliary flow selection
switch
To select low, press top.
To select high, press bottom.
Select low or high auxiliary flow based
on attachment.
Item Description IMPORTANT
To Next Page
Loading...
Need help?
General
