VP30 Operator’s Manual Controls - 23
Control Console
2. Plow vibrator/Drilling
attachment control
Plow mode:
To start plow vibrator, pull
toward operator, then push
down to plow position.
To stop plow vibrator, release
control.
Drill mode:
To drill clockwise, push down.
To stop drill rotation, release
control.
To drill counterclockwise, pull
up.
IMPORTANT:
• This control changes function
when equipped with optional Roto
Witch
®
attachment.
• Plowing movement is always
backward (toward operator).
IMPORTANT: Always rotate
clockwise during drilling and
backreaming. Rotate
counterclockwise only to dislodge a
dry bore bit or reamer that has seized
in the bore hole.
3. Speed/direction
controls
To drive straight forward,
push BOTH controls slowly
forward.
To drive straight in reverse,
pull BOTH controls slowly
toward operator.
To turn left, move RIGHT
speed/direction control for
forward or reverse.
To turn right, move LEFT
speed/direction control for
forward or reverse.
To go faster in any direction,
move controls farther from
neutral position.
To stop, release controls.
IMPORTANT: Plowing movement is
always backward (toward operator).
Item Description Notes
To Next Page
Loading...