VP30 Operator’s Manual Service - 87
300 Hour
300 Hour
Plow
Change Plow Vibrator Oil
Change plow vibrator oil every 300 hours.
To change:
1. Open fill (1) to vent vibrator.
2. Drain oil at drain plug (3).
3. Replace plug and move plow vibrator to horizontal position.
4. Add MPL at fill until oil is halfway up sight glass (2). Refill capacity is 4 qt (3.8 L).
Location Task Notes
PLOW Change plow vibrator oil MPL
Hot parts may
cause burns. Do
not touch until
cool.
To help avoid injury: Do not drain oil from
plow vibrator when hot. Let vibrator cool before
removing drain plug.
To Next Page
Loading...