Service - 86 VP30 Operator’s Manual
100 Hour
Plow
Change Plow Vibrator Oil
Change engine oil after the first 100 hours of
operation and every 300 hours thereafter.
To change:
1. Open fill (1) to vent vibrator.
2. Drain oil at drain plug (3).
3. Replace plug and move plow vibrator to horizontal position.
4. Add MPL at fill until oil is halfway up sight glass (2).
Hot parts may
cause burns. Do
not touch until
cool.
To help avoid injury: Do not drain oil from
plow vibrator when hot. Let vibrator cool before
removing drain plug.
To Next Page
Loading...