Transport - 46 VP30 Operator’s Manual
Haul
Load
1. Remove parking pin from parking position.
2. Start engine. See “Start” on page 38.
3. Pull plow lift control to slightly raise plow, but keep as low as possible.
4. Move machine to rear of trailer and align with ramps.
5. Set engine to low throttle.
6. Move speed/direction control slowly and push to appropriate speed.
7. Drive machine onto trailer, plow first, until tiedown position is reached. See “Drive” on page 39.
8. If space allows, push plow lift control to lower plow onto trailer.
9. Engage parking pin in parking position and shut down machine. See “Shut Down” on page 41.
Crushing weight. If load falls or moves it could kill or crush
you. Stay away.
To help avoid injury:
• Attach trailer to tow vehicle before loading or unloading.
• Load and unload trailer on level ground.
• Block trailer wheels.
• Put ground drive control into neutral. Turn off ignition. Set parking pin.
To Next Page
Loading...
