VP30 Operator’s Manual Service - 81
Each Use
Check Hydraulic Fluid Level and Reservoir Cap
With frame level, check fluid at sight glass (1)
before each use. Maintain fluid level on midway
point on sight glass. Add THF at fill (2) as
needed.
Check hydraulic reservoir cap (2) before each
use. Clean as needed.
Check Hydraulic Fluid Cooler
Check hydraulic fluid cooler for dirt and debris
before each use. Clean with compressed air as
needed. See “Change Hydraulic Fluid and Filter”
on page 88.
Contents under pressure. Relieve pressure before
opening. Death or injury could occur.
To help avoid injury:
• Wear gloves and safety glasses.
• Wait until cool to decrease pressure in hydraulic reservoir.
• To release remaining pressure, slowly open hydraulic reservoir.
t56om029h.epst56om029h.eps
To Next Page
Loading...
