FSG 7016
Operator’s Manual
2 D10011 November 2009
Warranty - Copyright - Service
Warranty
The details and data in this operator's manual correspond to the respective
state of technology on the day of printing. We reserve our right to change
without prior notice due to new technological design or corresponding new
production technology.
Dittel Messtechnik GmbH takes no guarantee for these documents with
respect to application and interpretation.
Dittel Messtechnik GmbH ("Warrantor") warrants to the purchaser of new radio
equipment of the warrantor's manufacture that such equipment shall be free
from defects in material and workmanship from the date of delivery.
Equipment and accessory items not manufactured by the Warrantor carry the
standard warranty of the manufacturer thereof.
This warranty does not cover equipment which has been
1. damaged or not maintained as reasonable and necessary,
2. modified in any way,
3. improperly installed,
4. repaired by someone other than the warrantor or an authorised
warranty avionics workshop, or
5. used in a manner or purpose for which the equipment was not
intended.
This warranty shall not extend to incidental or consequential damages arising
from operation of the equipment or from any claimed breach of this warranty.
Copyright 2009 Dittel Messtechnik GmbH
All rights reserved. This document contains proprietary information and such
information may not be disclosed to others for any purpose nor used for
manufacturing purposes without prior written permission of the manufacturer
Dittel Messtechnik GmbH, 86899 Landsberg, Germany.
In this document no mention is made of patents, trademark rights, or other
proprietary rights which may attach to certain words or entries. The absence of
such mention, however, in no way implies that the words or entries in question
are exempt from such rights.
Service Information
Should any unusual problem arise or further information be desired, please
contact your nearest DITTEL representative or the Dittel Messtechnik GmbH,
Avionics Department, Erpftinger Strasse 36, 86899 Landsberg, Germany.
The information in this Operator's Manual does not profess to include all the details of design,
production, or variation of the equipment, or to cover all the possible contingencies which may
arise during operation or maintenance. We welcome your comments concerning this Manual.
Although every effort has been made to keep it free of errors, some may occur. When reporting
a specific problem, please describe it briefly and include the Operator's Manual article number,
paragraph or figure number, and the page number.
Send your comments to Publications Department
Dittel Messtechnik GmbH
Erpftinger Strasse 36
86899 Landsberg am Lech
Germany
or via e-mail to: info@dittel.com
Subject to technical changes Printed in Germany
To Next Page
Loading...
