INSTALLATION & SETUP
11
“Hour/Minute” - Hour and Minute Setting (0000 to 2359)
Press select button 1 and the current 4-digit hour and minute setting will be
displayed (24 hour).
Press and hold select button 1: Set Hours
Press and hold select button 2: Set Minutes
Press select buttons 1&2 simultaneously to move to the next item in the menu.
Daylight Savings Time
Press select button 1 and the current setting will show on the display.
Press and hold select button 1 to scroll through the “Daylight Savings Time”
options listed:
“American” – North American rules – Set forward 1 hour at 2:00 am on the first
Sunday in April; Set backward 1 hour at 2:00 am on the last Sunday in October.
“European” – European rules – Set forward 1 hour at 1:00 am on the last Sunday in
March; Set backward 1 hour at 1:00 am on the last Sunday in October.
“Australian” – Australian rules – Set forward 1 hour at 1:00 am on the first Sunday
in October; Set backward 1 hour at 1:00 am on the last Sunday in March.
“Off” – Off Rules – Daylight savings time change will not be made.
Release the select button with the display showing the “Daylight Savings Time”
setting you wish to use and display will return to “Daylight Savings Time”.
Press and hold select buttons 1&2 simultaneously to move to “Return”.
Press select button 1 to move to “Time”
Language
This function is used to set the language that will be used for display messages. To display the current
language selected, press select button 1. To change the language selected, press & hold select button 1
to scroll through the language menu. Once the desired language is shown on the display, release the
button. The display will then return to "Language".
English Spanish
French Slovene
German Finnish
Italian Norwegian
Portuguese
Press and hold select buttons 1 & 2 simultaneously to move to the next item on the menu.
Electronic Counter
This function is used to show historical cash sales, historical total vends, historical product counts by
selection, and historical product counts that have occurred for prices being used from outside the vender.
Press select button 1 to view the current four (4) button code. To view the data the four button code must
be entered. Once entered the listed menus are available from the front of the vender:
Press select button 1: Show historical cash sales.
Press select button 2: Show historical total vends.
Press select button 3: Show historical product counts by selection.
Press select button 4: Show list of prices and historical product counts that have occurred for
those prices.
Press select button 5: Returns to sales idle mode (normal vender operation).
To Next Page
Loading...
