GENERAL INFORMATION
3
APPLICATION
This manual applies to Pepsi-Cola High Visibility
Venders (HVV), beginning with HT2 production run
6730BZ and HT3 production run 6757DZ. HVV
venders that were manufactured prior to production
run 6730BZ have significant differences in
programming and parts content from previous
versions. The earlier versions were manufactured in
production runs 6664DY, 6672DY, and 6698BZ. To
order parts, or for information pertaining to these
earlier versions, please contact Dixie-Narco.
VENDER SAFETY PRECAUTIONS
Please read this manual in its entirety. This service
information is intended to be used by a qualified
service technician, who is familiar with proper and
safe procedures to be followed when repairing,
replacing, or adjusting any Dixie-Narco vender
components. All repairs should be performed by a
qualified service technician who is equipped with the
proper tools and replacement components, using
genuine Dixie-Narco factory parts.
REPAIRS AND/OR SERVICING
ATTEMPTED BY UNINFORMED
PERSONS CAN RESULT IN
HAZARDS DEVELOPING DUE TO
IMPROPER ASSEMBLY OR
ADJUSTMENTS WHILE
PERFORMING SUCH REPAIRS.
PERSONS NOT HAVING A PROPER
BACKGROUND MAY SUBJECT
THEMSELVES TO THE RISK OF
INJURY OR ELECTRICAL SHOCK
WHICH CAN BE SERIOUS OR EVEN
FATAL.
PRODUCT IDENTIFICATION
First production of HT2 was June 2001.
First production of HT3 was December 2001.
The production date of Dixie-Narco products is
determined by the date code incorporated in the
serial number.
The vender serial number takes the form xxxx-
yyyyzz. The first 4 digits (xxxx) identify the specific
vender. The next 4 digits (yyyy) identify the
manufacturing run that the vender was built in. The
last two alpha characters (zz) identify the quarter
and the year the vender was built. The first alpha-
character identifies the quarter.
A = 1st quarter
B = 2nd quarter
C = 3rd quarter
D = 4th quarter
The second alpha-character identifies the year:
Y = 2000
Z = 2001
A = 2002
B = 2003
C = 2004
D = 2005
PHYSICAL CHARACTERISTICS
501E
HEIGHT
72.5”
WIDTH
37.5”
DEPTH
36.0”
DEPTH WITH VALIDATOR
36.0”
SHIPPING WEIGHT
783 lbs.
To Next Page
Loading...
