Dixie Narco 501E - Page 15

INSTALLATION & SETUP
14
Stop
This function is used to set the hours and minutes to stop secondary pricing. Press select button
1 and the current four-digit hour and minute setting will be displayed. Press and hold select button
1 to change the hour setting, press button 2 to change the minute setting.
Press select buttons 1 & 2 simultaneously to move to the next item in the menu.
Return
Press button 1 to scroll to Secondary Pricing
Press buttons 1 & 2 to scroll to the next item in the menu
Light
This function is used to turn the lights off and on during certain periods of the day.
Press select button 1 will enter “Days”.
Days
This function is used to set the days of the week to turn lights on and off.
Day of Week: Sunday Wednesday Saturday Return
Monday Thursday All Days
Tuesday Friday not found
Press select button 1 and "Monday #" will show on the display, where # is “0” (disable) or “1”
(enable). Press and hold select button 1 to toggle between “0” and “1”. Release the select button
with the display showing the setting you wish to use. Press select buttons 1 & 2 simultaneously
to scroll through all available days, “All Days”, “not found”, and “Return”. Press select button 1 at
the “Return” prompt returns to “Days”.
Press & hold select buttons 1 & 2 simultaneously to move to the next item on the menu.
Start
This function is used to set the hours and minutes to start lighting routine.
Press select button 1 and the current four-digit hour and minute setting will be displayed.
(24 hour).
Press & hold select button 1: Set Hours
Press & hold select button 2: Set Minutes
Press select buttons 1 & 2 to scroll to start.
Press select buttons 1 & 2 simultaneously to move to the next item on the menu.
Stop
This function is used to set the hours and minutes to stop lighting routine.
Press select button 1 and the current four-digit hour and minute setting will be displayed.
(24 hour)
Press & hold select button 1: Set Hours
Press & hold select button 2: Set Minutes
Press select buttons 1 & 2 to scroll to stop.
Press select buttons 1 & 2 simultaneously to move to the next item on the menu.
Enable
This function is used to allow the lighting routine to go in to affect.
Press select button 1 and the current setting will be displayed (On or Off).
Press and hold select button 1 to toggle between “On” and “Off”.
Release the select button showing the setting you wish to use and display will return to “Enable”.
Press select buttons 1 & 2 to scroll to “Return”.