Dixie Narco P Series - PROGRAMMING; VENDER CONFIGURATION

PROGRAMMING P-SERIES
Page 11 of 78
Setting The Vender Type
To program with “SCOL” on the display press select button 1. The display will show “6” for six
columns. Press select buttons 1 & 2 to scroll through available number of columns in the machine.
When the displayed number of columns matches the number of columns in the machine, press select
button 1 to set the number of columns. “MODL” will appear on the display, press select button 1. The
display will show the first available model number for the current vender type. Press select button 1 & 2
to scroll through the available vender model numbers for this vender. When the vender type you wish to
save is showing on the display, press select button 1. The display will scroll “1 = SET PACKAGE
TYPE 2 = EXIT”. Press select button 1 and the display will show “1” indicating the package type. This
will allow you to set the package type of the machine if it is different that the default of package type 2.
Press select button 1 & 2 to scroll through the available package types. Press select button 1 to set the
displayed package type. “2=Exit 1=Prime COL1” will appear on the display. Press button 1 to prime
column 1 or select button 2 to skip priming column 1. The display will then display “2=Exit 1=Prime
COL2”. Repeat the priming process until all columns have been primed or skipped.
6 column machines
DN552-5,
DN552-6,
DN552-7,
7 column machines
DN532-5,
DN532-6,
DN532-7,
8 column machines
DN756-7,
DN756-8,
DN756-9,
DN756-10,
DN756-11,
DN756-12,
DN756-13,
DN756HV-12,
10 column machines
DN760-9,
DN760-10,
DN760-11,
DN760-12,
DN760-13,
DN760HV-12,
The following are other model numbers that may appear:
6 column machines 8 column machines (continued)
DN552-5, DN756-9
DN552-6, DN756-10
DN552-7, DN756-11
DN552-8, DN756-12
7 column machines DN756-13
DN532-5, 10 column machines
DN532-6, DN760-9
DN532-7, DN760-10
DN532-8, DN760-11
8 column machines DN760-12
DN756-7, DN760-13
DN756-8,