Dixie Narco P Series - Page 20

PROGRAMMING P-SERIES
Page 20 of 78
Days
This function is used to set the days of the week to be affected by limited access.
Day of Week:
(SUN) Sunday (WED) Wednesday (SAT) Saturday (RTN) Return (RTN)
(MON) Monday (THUR) Thursday (ALL) All Days
(TUE) Tuesday (FRI) Friday (NONE) No Days
Press select button 1 and "Monday #" will show on the display, where # is “0” (disable) or “1”
(enable). Press and hold select button 1 to toggle between “0” and “1”. Release the select button
with the display showing the setting you wish to use. Press select buttons 1 & 2 simultaneously
to scroll through all available days, “ALL”, “NONE”, and “RTN”. Pressing select button 1 when
“ALL” is” displayed will cause the display to change to “ON” when all days have been enabled.
Pressing select button 1 when “NONE” is” displayed will cause the display to change to “OFF”
when all days have been disabled. Press select button 1 at the “RTN” prompt returns to “Days”.
Press & hold select buttons 1 & 2 simultaneously to move to the next item on the menu.
STR1 - Start 1
This function is used to set the hours and minutes to start period 1 limited access. Press select
button 1 and the current four-digit hour and minute setting will to be displayed (24 hour).
Press & hold select button 1: Set Hours
Press & hold select button 2: Set Minutes
Press select buttons 1 & 2 simultaneously to move to the next item in the menu.
STP1 - Stop 1
This function is used to set the hours and minutes to stop period 1 limited access. Press select
button 1 and current four-digit hour and minute will be displayed. (24 hour).
Press & hold select button 1: Set Hours
Press & hold select button 2: Set Minutes
Press select buttons 1 & 2 simultaneously to move to the next item in the menu.
STR2 - Start 2
This function is used to set the hours and minutes to start period 2 limited access. Press select
button 1 and the current four-digit hour and minute setting will be displayed (24 hour).
Press & hold select button 1: Set Hours
Press & hold select button 2: Set Minutes
Press select buttons 1 & 2 simultaneously to move to the next item in the menu.
STP2 - Stop 2
This function is used to set the hours and minutes to stop period 2 limited access. Press select
button 1 and the current four-digit hour and minute setting will be displayed (24 hour).
Press & hold select button 1: Set Hours
Press & hold select button 2: Set Minutes
Press select buttons 1 & 2 simultaneously to move to the next item in the menu.
RTN - Return
Press select button 1 to return to “LIM”.
Press & hold select buttons 1 & 2 simultaneously to move to the next item on the menu.