dji FLYCART 30 - Page 14

DJI FlyCart 30 User Manual
14
©
2024 DJI All Rights Reserved.
home screen. Hold the back button and
then press another button to activate
button combinations. Refer to the
Button Combinations section for more
information.
7. L1/L2/L3/R1/R2/R3 Buttons
When buttons are displayed in the
app near these physical buttons or the
prompts in the app include L1/L2/L3/R1/
R2/R3, press the corresponding button
on the remote controller to operate
instead of tapping the touchscreen.
8. Return to Home (RTH) Button
Press and hold to initiate RTH. Press
again to cancel RTH.
9. Microphones
10. Status LEDs
Indicates the status of the remote
controller. Refer to Guide on the home
screen for more information.
11. Battery Level LEDs
Displays the current battery level of the
internal battery.
12. Internal GNSS Antennas
DO NOT block the internal GNSS
antennas during use, otherwise the
positioning accuracy may be aected.
13. Power Button
Press once to check the current battery
level. Press, and then press and hold to
power the remote controller on or o.
While the remote controller is powered
on, press once to turn the touchscreen
on or o.
14. 5D Button
The functions of this button can be set
in DJI Pilot 2.
15. Flight Pause Button
Press once to have the aircraft brake
and hover in place (only when GNSS or
vision systems are available).
34
32
36
35
33
37
38 39
8
13
5 5
7
7
1
4
4
3
15
2
10
11
9
16
17
18
19
25
26
27
28
3 0
29
21
22
23
24
31 31
31
4 0
2 0 2 0
12
6
14
4 1
9
34
32
36
35
33
37
38 39
8
13
5 5
7
7
1
4
4
3
15
2
10
11
9
16
17
18
19
25
26
27
28
3 0
29
21
22
23
24
31 31
31
4 0
2 0 2 0
12
6
14
4 1
9
16. C3 Button
Customize the function of this button in
DJI Pilot 2.
17. Left Dial
Controls the tilt of the FPV gimbal
camera.
18. Reserved Button
19. Flight Mode Switch
The three positions of the switch
correspond to: N-mode (Normal),
S-mode (Sport), and F-mode (Winch
System).
20. Internal Antennas
Relays aircraft control and image
transmission signals. Do not block
the internal RC antennas during use.
Otherwise, the signals may be aected.
21. microSD Card Slot
For inserting a microSD card.