EasyManua.ls Logo

dji FLYCART 30 - Normal Procedures; Airspace Environment; Flight Environment Requirements; Flight Recorder

dji FLYCART 30
95 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DJI FlyCart 30
User Manual
©
2024 DJI All Rights Reserved.
45
Normal Procedures
Airspace Environment
Make sure to have training and practice before operating any actual flight. Practice with the
simulator in DJI Assistant 2 or fly under the guidance of experienced professionals. Pick a
suitable area to fly in according to the following flight requirements and restrictions. Fly the
aircraft below 120 m (400 ft). Any flight altitude higher than that may violate local laws and
regulations. Make sure you understand and comply with the local laws and regulations before
ying. Read the Safety Guidelines carefully to understand all safety precautions before ying.
Flight Environment Requirements
1. DO NOT use the aircraft in adverse weather conditions such as snow, fog, winds exceeding
12 m/s, or heavy rain exceeding 24.9 mm in 24 hours.
2. Only fly in open areas. Tall buildings and steel structures may affect the accuracy of the
compass and the GNSS signal.
3. Pay attention to utility poles, power lines, and other obstacles. DO NOT y near or above
water, people, or animals.
4. Try to maintain VLOS of the aircraft at all times, and avoid flying near obstacles, crowds,
animals, and bodies of water.
5. Avoid ying in areas with high levels of electromagnetism, including around mobile phone
base stations and radio transmission towers.
6. DO NOT y at more than 6 km (19,685 ft) above sea level.
7. DO NOT exceed the recommended payload weight limit when adding cargo to the cargo
case. Otherwise, ight safety may be aected.
8. Make sure that there is a strong GNSS signal and the GNSS antennas are unobstructed
during operation.
9. DO NOT operate the aircraft indoors.
Flight Recorder
Flight data is automatically recorded to the internal storage of the aircraft. You can connect the
aircraft to a computer via the USB port and export this data via DJI Assistant 2 or DJI Pilot 2 app.
Flight Restrictions and Unlocking
GEO (Geospatial Environment Online) System
The DJI Geospatial Environment Online (GEO) system is a global information system that
provides real-time information on ight safety and restriction updates and prevents UAVs from

Table of Contents

Other manuals for dji FLYCART 30

Related product manuals