dji FLYCART 30

DJI FlyCart 30 User Manual
74
©
2024 DJI All Rights Reserved.
LED Patterns
The Battery Level Indicators will show the current battery level and status during charging
and discharging. The indicators are dened below:
is on is blinking is o
Checking the Battery Level
If the battery is in power-saving mode, press the power button once to check the current
battery level.
LED1 LED2 LED3 LED4 Battery Level
88%~100%
75%~87%
63%~74%
50%~62%
38%~49%
25%~37%
13%~24%
0%~12%
LED Patterns During Charging
During charging, the LEDs blink in sequence to indicate the current battery level. All the LEDs
will be o after a full charge. Disconnect the battery when charging is complete, and always use
the ocially recommended charging device to charge the battery.
LED1 LED2 LED3 LED4 Battery Level
0%~49%
50%~74%
75%~89%
90%~99%
100%
Battery Error LED Patterns
The table below shows battery protection mechanisms and corresponding LED patterns.
LED1 LED2 LED3 LED4 Blinking Pattern Descriptions
LED2 and LED4 blink three
times per second
Aircraft short circuit/
overcurrent at power on
LED2 and LED4 blink two
times per second
Under-voltage at power on
LED2 blinks twice per second
Overcurrent detected