dji FLYCART 30

DJI FlyCart 30 User Manual
88
©
2024 DJI All Rights Reserved.
Perform Task
1. Create Task
Tap Task > Task List to create a task. Select a ight route, device and view the status of the
aircraft. Tap Conrm to complete.
2. Perform Task
In the task list, tap the takeo icon. The aircraft will start a self-check. Select conrm after
self-check is finished. Before taking off for the first time, DeliveryHub needs to obtain
permission from the remote controller at the takeoff point. The user at the takeoff point
needs to confirm in DJI Pilot 2 when there is a prompt. The aircraft can take off after
permission of cloud which last for seven days is given.
3. Task Tracking
View the task status in the Task Tracking page. Tap the icon to check the aircraft information.
Tap FPV to view the FPV camera view. The user at the start point can check the Cloud Service
status in DJI Pilot 2 homepage and camera view.
If the cloud service is not connected or the icon turns gray, this means the connection is
abnormal. Check the network of the remote controller.