dji FLYCART 30 - System Assembly; Preparing the Remote Controller

DJI FlyCart 30 User Manual
52
©
2024 DJI All Rights Reserved.
System Assembly
Preparing the Remote Controller
Charging the Remote Controller
Use the DJI USB-C Power Adapter (100W) to charge the remote controller. The internal battery
of the remote controller must be charged to activate it before rst use. The battery level LEDs
will ash to indicate that the internal battery has been activated and charging has started.
• The remote controller cannot be powered on before activating the internal battery.
Checking the Battery Level
While the remote controller is powered off, press once on the power button to check the
battery level of the internal battery.
Powering On/O
Press once, then press and hold to power the remote controller on/o. The remote controller
needs to be activated before using it for the rst time. Follow the prompts to activate.