dji FLYCART 30

DJI FlyCart 30 User Manual
©
2024 DJI All Rights Reserved.
81
Updating Firmware
Use DJI Pilot 2 or DJI Assistant 2 (Delivery Series) to update the remote controller, aircraft, and
other connected DJI devices.
Using DJI Pilot 2
Online Updating
1. Power on the remote controller and aircraft. Ensure the aircraft is properly linked to the
remote controller, their battery levels are higher than 25%, and the remote controller is
connected to the internet.
2. Run DJI Pilot 2. A prompt will appear on the homepage if new rmware is available. Tap to
enter the Firmware Update view.
3. Tap Update All and DJI Pilot 2 will download the rmware and update the aircraft and remote
controller.
4. The aircraft and remote controller will automatically restart after the firmware update is
complete.
• The update takes approximately 10 minutes (depending on network strength). Make sure
the remote controller is connected to the internet during the whole update process.
• The DB2000 Intelligent Flight Batteries in the aircraft will be updated to the latest
rmware version.
Oine Updating
An offline firmware package can be downloaded from the DJI official website to an external
storage device such as a microSD card or USB stick. Run DJI Pilot 2, tap HMS, and then Firmware
Update. Tap Oine Update to select the rmware package of the remote controller or aircraft
from the external storage device and tap Update All to update.
Using DJI Assistant 2 (Delivery Series)
1. Connect the aircraft and remote controller to the computer separately, as the DJI Assistant 2
does not support updating multiple DJI devices at the same time.
2. Make sure the PC is connected to the internet and the DJI device is powered on with a
battery level higher than 25%.
3. Launch DJI Assistant 2 and log in with a DJI account.
4. Tap the rmware update button on the left side of the main interface.
5. Select the firmware version and click to update. The firmware will be downloaded and
updated automatically.
6. When the “Update successful” prompt appears, the device update is complete, and the DJI
device will restart automatically.