To Next Page

To Previous Page

DJI FlyCart 30

User Manual

• When switching GNSS to the BeiDou satellite positioning system in DJI Pilot 2, the

aircraft only will only use a single positioning system and the satellite search capability

will become poor. Fly with caution.

Return to Home

Return to Home (RTH) brings the aircraft back to the last recorded Home Point when the

positioning system is functioning normally. There are three types of RTH: Smart RTH, Low

Battery RTH, and Failsafe RTH.

The aircraft automatically ies back to the Home Point and lands when Smart RTH is initiated,

the aircraft enters Low Battery RTH, or the video link signal is lost during ight if the Home Point

is recorded during takeo and the GNSS signal is strong.

• Home Point: The Home Point is recorded when the GNSS icon is white during takeo

or ight.

Smart RTH

Press and hold the RTH button on the remote controller to initiate Smart RTH. The orientation

of the aircraft cannot be controlled during RTH. Use the remote controller to control the ight

altitude of the aircraft to avoid collision during the RTH process. Press the RTH button to exit

Smart RTH and regain full control of the aircraft.

Smart RTH Procedure

1. The Home Point is recorded.

2. RTH is triggered, for example, Smart RTH or Low Battery RTH.

3. The Home Point is conrmed and the aircraft adjusts its orientation.

a. If more than 50 m (164 ft) from the Home Point and below the pre-set RTH altitude,

the aircraft will ascend to the pre-set RTH altitude before ying to the Home Point. The

aircraft will y directly to the Home Point if it is above the pre-set RTH altitude.

b. When the distance is between 5 m (16.4 ft) and 50 m (164 ft) from the Home Point, the

aircraft will y to the Home Point at the current altitude.

c. When the distance is less than 5 m from the Home Point, the aircraft will land where it is.

Low Battery RTH

If the Low Battery Action is set to RTH in the Aircraft Battery settings in the app, the aircraft will

enter RTH automatically when the aircraft battery level reaches the low battery threshold.

During RTH, users can control the altitude of the aircraft to avoid collisions when returning to

the Home Point. Press the RTH button once to exit RTH and regain control of the aircraft.

The aircraft will not enter RTH if the Low Battery Action is set to Warning in the Aircraft Battery

settings in the app.

Max Payload	30 kg
Max Flight Speed	20 m/s
Max Wind Resistance	12 m/s
Intelligent Battery	Yes
Aircraft Type	Multi-rotor
Hovering Accuracy	Vertical: ±0.1 m
Operating Temperature Range	-20°C to 45°C

dji FLYCART 30 Flight Manual

Other manuals for dji FLYCART 30