dji FLYCART 30

DJI FlyCart 30 User Manual
©
2024 DJI All Rights Reserved.
65
System Shutdown
After landing, push the throttle stick down and hold to stop the motors. Press the power button
and then press and hold to power o the aircraft and remote controller.
Post-Flight Inspection
1. Make sure that the aircraft is powered o. Remove the battery from the aircraft and store it
properly.
2. Check the aircraft structure, clean the dirt and dust, and replace any loose or damaged
parts.
3. Make sure that the aircraft is folded correctly for transportation.
4. Make sure that the battery connector on the aircraft is clean and dry.