EasyManua.ls Logo

dji FLYCART 30 - Radio Frequency Environment; Use of Launch and Recovery Equipment; Distance to Control Station

dji FLYCART 30
95 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DJI FlyCart 30
User Manual
©
2024 DJI All Rights Reserved.
51
Radio Frequency Environment
1. Fly in open areas. Tall buildings, steel structures, mountains, rocks, or forests may aect the
accuracy of the on-board compass and block both GNSS and remote control signals.
2. Avoid using wireless devices such as mobile devices with Bluetooth, Wi-Fi, etc., that use the
same frequency bands as the remote controller.
3. When using with multiple aircrafts, make sure that the distance between each aircraft is
more than 10 m to avoid interference. Pay attention to the interference prompts and adjust
the distance of the aircraft accordingly.
4. The sensitivity of the radar module may be reduced when operating several aircraft within a
short distance. Operate with caution.
5. Be alert when ying near areas with magnetic or radio interference. These include, but are
not limited to, high voltage lines, large scale power transmission stations or mobile base
stations, and broadcasting towers. Failing to do so may compromise the transmission quality
of this product or cause transmission errors which may aect ight orientation and location
accuracy. The aircraft may behave abnormally or go out of control in areas with too much
interference.
Use of Launch and Recovery Equipment
Not applicable.
Distance to Control Station
When taking off or landing, the aircraft should be more than 10 m away from the remote
controller and operator to ensure safety. Maintain visual line of sight with the aircraft at all
times.

Table of Contents

Other manuals for dji FLYCART 30

Related product manuals