dji FLYCART 30

DJI FlyCart 30 User Manual
50
©
2024 DJI All Rights Reserved.
DJI AirSense
Airplanes with an ADS-B transceiver will actively broadcast ight information including location,
flight path, speed, and altitude. DJI aircraft that have DJI AirSense technology are capable of
receiving flight information broadcasts from ADS-B transceivers that comply with 1090ES
or UAT standards within a radius of 10 kilometers. Based on the received ight information,
DJI AirSense can analyze and obtain the location, altitude, orientation, and velocity of the
surrounding crewed airplanes, and compare such figures with the current position, altitude,
orientation, and velocity of the DJI aircraft to calculate in real-time the potential risk of collision
with the surrounding crewed airplanes. DJI AirSense will then display a warning message in DJI
Pilot 2 according to the risk level.
DJI AirSense only issues warning messages on approaches by specic crewed airplanes under
special circumstances. Always y the aircraft within your visual line of sight and take precautions
at all times to ensure flight safety. Please be aware that DJI AirSense has the following
limitations:
1. DJI AirSense can only receive messages sent by airplanes with an ADS-B Out device that is in
compliance with 1090ES (RTCA DO-260) or UAT (RTCA DO-282) standards. DJI devices cannot
receive broadcast messages from or display warnings from airplanes not equipped with
properly functioning ADS-B Out devices.
2. If there is an obstacle between a crewed aircraft and a DJI aircraft, DJI AirSense will not
be able to receive ADS-B messages from the aircraft or send warnings to the user. Keenly
observe your surroundings and y with caution.
3. Warning prompts may appear with delay if DJI AirSense experiences any interference from
the surrounding environment. Keenly observe your surroundings and y with caution.
4. Warning prompts may not appear if the DJI aircraft is unable to obtain information on its
own location.
5. DJI AirSense cannot receive ADS-B messages from crewed airplanes or send warnings to the
user when it is disabled or miscongured.
When a risk is detected by the DJI AirSense system, the AR projection display will appear on the
current view in DJI Pilot 2, showing the distance between the DJI aircraft and the airplane, while
also sending a warning. Users should follow the instructions in DJI Pilot 2 upon receiving the
alert.
a. Notice: A blue airplane icon will appear on the map.
b. Caution: The app will display the message: Crewed aircraft detected nearby. Fly with caution.
A small square, orange icon with the distance information will appear on the camera view,
and an orange airplane icon will appear on the map view.
c. Warning: The app will display the message: Collision Risk. Descend or Ascend Immediately.
If the user does not operate the aircraft, the app will display the message: Collision Risk. A
small square, red icon with the distance information will appear on the camera view, and a
red airplane icon will appear on the map view. The remote controller will vibrate to alert the
user.