EasyManua.ls Logo

dji FLYCART 30

dji FLYCART 30
95 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DJI FlyCart 30
User Manual
48
©
2024 DJI All Rights Reserved.
unlocking request has been approved. The aircraft cannot y back into the buer zone after
leaving the buer zone.
Buer Zones for Altitude Zones: A buer zone of about 20 meters wide is established outside
each Altitude Zone. As shown in the illustration below, when approaching the buer zone of
an Altitude Zone in a horizontal direction, the aircraft will gradually reduce its ight speed and
hover outside the buer zone. When approaching the buer zone from underneath in a vertical
direction, the aircraft can ascend and descend in altitude or y away from the Altitude Zone.
The aircraft cannot y toward the Altitude Zone. The aircraft cannot y back into the buer zone
in a horizontal direction after leaving the buer zone.
20m
20m
20m
20m
Restricted Zone/
Authorized Zone
Ground
Buffer Zone
Altitude Limit
Altitude Zone
Ground
Unlocking GEO Zones
To satisfy the needs of dierent users, DJI provides two unlocking modes: Self-Unlocking and
Custom Unlocking. Users may make either type of request on the DJI Fly Safe website or via a
mobile device.
Self-Unlocking is intended for unlocking Authorization Zones. To complete Self-Unlocking, the
user is required to submit an unlocking request via the DJI Fly Safe website at https://y-safe.dji.
com. Once the unlocking request is approved, the user may synchronize the unlocking license
through the DJI Pilot 2 app (Live Self-Unlocking) to unlock the zone; alternatively, the user may
launch or y the aircraft directly into the approved Authorization Zone and follow the prompts
in DJI Pilot 2 to unlock the zone (Scheduled Self-Unlocking). For Live Self-Unlocking, the user can
designate an unlocked period during which multiple ights can be operated. Scheduled Self-
Unlocking is only valid for one ight. If the aircraft is restarted, the user will need to unlock the
zone again.
Custom Unlocking is tailored for users with special requirements. It designates user-defined
custom ight areas and provides ight permission documents specic to the needs of dierent
users. This unlocking option is available in all countries and regions and can be requested via
the DJI Fly Safe website at https://y-safe.dji.com.

Table of Contents

Other manuals for dji FLYCART 30

Related product manuals