dji FLYCART 30 - Page 82

DJI FlyCart 30 User Manual
82
©
2024 DJI All Rights Reserved.
• The battery firmware is included in the aircraft firmware. Be sure to update the
rmware of all the batteries.
• Make sure all DJI devices are properly connected to the PC during an update.
• During the update process, it is normal for the aircraft LEDs to blink, and the aircraft to
reboot. Wait patiently for the update to complete.
• Make sure to keep the aircraft away from people and animals during a rmware update,
system calibration or parameter conguration.
• Make sure you are using the latest rmware version to ensure ight safety.
• After the firmware update is completed, the remote controller and the aircraft may
become unlinked. Re-link them if necessary.