dji FLYCART 30 - Page 16

DJI FlyCart 30 User Manual
16
©
2024 DJI All Rights Reserved.
Installing the WB37 Intelligent Battery
Push the rear cover release button to open the rear cover. Insert the WB37 battery into the
battery compartment and push forward until it clicks firmly in place. To remove the WB37
battery, press and hold the battery release button and push the battery downward.
1
2
Battery Release Button
Charging
Use the DJI 100W USB-C Power Adapter to charge both the internal and external batteries
simultaneously.
Charging Mechanism
1. When the remote controller is connected with both a charging device and an external
battery, the remote controller will be powered by the charging device.
2. When the external battery has been inserted and the remote controller is not connected to
a charging device, the remote controller will be powered by the external battery. When the
external battery is depleted, the remote controller will be powered by the internal battery.
• Use the provided charger to charge the remote controller. Otherwise, use a locally
certied USB-C charger with a maximum rated power and voltage of 65 W and 20 V.
• Fully charge and discharge the internal and external batteries of the remote controller at
least once every three months. The battery will deplete when it is stored for an extended
period.