dji FLYCART 30 - Page 29

DJI FlyCart 30 User Manual
©
2024 DJI All Rights Reserved.
29
1
2
3
red (warning), the aircraft is not functioning normally and must be checked and cleared
before takeo. Read the Health Management System (HMS) section for more details. Tap
to enter the Health Management System.
b. If the current remote controller is not connected to the aircraft, a picture of the remote
controller will be displayed. Tap to link the remote controller to the aircraft, and the
aircraft model and picture will be displayed after it is connected.
c. Display Cargo System or Winch System.
d. The current remote controller role is displayed as A or B (the role name of the current
remote controller appears in black). Tap to view the error information on the remote
controller or switch the remote controller role.
e. Firmware information. A prompt will appear notifying the user that new firmware is
available. Tap to start updating.
6. Camera View
Tap to enter preight check view and camera view.
7. Academy
Tap to view product tutorials, ight guides, industry cases, and download product manuals
to the remote controller.
8. Flight Route
Tap to enter the flight route library. Users can create and view flight routes. Tap to view
all the favorite ight routes in Favorites. Flight routes can be imported from and exported
in batches to the remote controller or another external mobile storage device. If DJI
DeliveryHub is connected, you can also view all ight routes sent from the cloud or upload
local tasks to the cloud. Refer to the Flight Route section for details.
Preight Check View
1. View the aircraft's health information, flight mode, Intelligent Flight Battery level, remote
controller role, remote controller internal and external battery levels, Home Point status and
RTK status.