dji FLYCART 30 - Page 31

DJI FlyCart 30 User Manual
©
2024 DJI All Rights Reserved.
31
1. Back
Tap to return to the homepage of the DJI Pilot 2 app.
2. System Status Bar
Displays aircraft ight status and various warning messages. If a new alert appears during
ight, it will also be displayed here and continue ashing. Tap to view the information and
stop the ashing.
3. Intelligent Flight Battery Level Indicator
The battery level indicator bar provides a dynamic display of the remaining power of the
current Intelligent Flight Battery and the flying time. Each battery state is indicated by a
dierent color. Refer to the table below for details.
Green Indicates the battery power is sucient for ight.
Yellow Indicates the battery level is low and it is recommended to y in the area
near the user.
Red Indicates the battery level is critically low. The user should land the aircraft
as soon as possible and replace the batteries.
White dots Threshold that a user can set for low battery warning and critical low
battery warning.
H The recommended RTH battery level. The remote controller will remind the
user that the current battery level is only sucient for RTH.
E The evaluated battery level. Indicates the battery level required when
ying to the end of the ight route or alternate site or Home Point when
performing a ight route.
4. Flight Status
Display the ight mode and ight status. Tap to enter Preight Check view.
5. Propulsion System Status
Displays the propulsion system data and status. Pay attention to the value of the propulsion
system. Return to home and land as soon as possible to check the propulsion system status
if there is a warning.
6. RTK and GNSS Positioning Status
Displays the RTK status and the number of GNSS satellites. When the aircraft RTK module is
enabled, the RTK icon will turn white; when it is disabled, the RTK icon will turn gray; when
there is no signal, the RTK icon will turn red. Tap the status icon to enable/disable RTK, and
view the status of the RTK mode and GNSS positioning. When the GNSS signal is strong and
the number of GNSS satellites is 15 or above, it will indicate it is safe to take o.
7. Signal Strength
Includes HD video link quality and remote controller link quality. The icon in white indicates
a strong signal; the icon in yellow indicates medium signal strength; the icon in red indicates
poor signal strength. If the signal is lost, the icon will display a disconnected status in red. If
DJI Celluar module is installed, the enhanced transmission signal will be displayed.
8. Intelligent Flight Battery Level
Displays the remaining battery level of the aircraft. Tap to view battery level, voltage, and
temperature information. The battery level unit can be selected as time or distance.