dji FLYCART 30 - Page 37

DJI FlyCart 30 User Manual
©
2024 DJI All Rights Reserved.
37
2. Reverse Path
Tap to swap the start and end points to reverse the ight path. S refers to the start point.
3. Delete Waypoints
Tap to delete the selected waypoints.
4. Flight Route Information
Displays the ight length, estimated ight time, and waypoint quantity.
5. Individual Waypoint Settings
Select a waypoint and set its parameters. The settings are applied to the selected waypoint,
including aircraft speed, aircraft altitude, aircraft yaw mode, waypoint type, gimbal tilt,
waypoint actions, longitude and latitude. It is recommended to select Follow Route for all
the parameters.
6. Route Settings
The settings are applied to the entire route, including safe takeo altitude, ascend to start
point, aircraft speed, aircraft altitude, aircraft yaw, gimbal control, waypoint type, and
completion action.
7. Parameters List
Edit the route name, advanced ight route settings, and altitude mode. Can also set the
aircraft type.
8. Save
Tap to save the ight route.
Live Mission Recording
Live mission recording uses the remote controller to add waypoints during the ight to record
aircraft positions and generate a route.
Flight Route Recording
Fly to the start point of the route and press the C1 button on the remote controller to set a
waypoint while the aircraft is hovering in place. There will be a prompt when waypoint 1 is
recorded successfully. Fly to the next waypoint and press C1 to record. Press C2 on the remote
controller to delete a waypoint.
Edit the Route
Tap to view the Library and select a ight route to preview. Tap settings and waypoint settings
to edit a route. Tap the save button to generate the edited route.
• If the aircraft is using RTK positioning, the altitude information will be obtained
automatically, DO NOT select Follow Route in this case.
• The safe altitude for opening the parachute is 60 m. It is recommended to keep the
aircraft altitude above 60 m when planning a route.