dji FLYCART 30 - Page 56

DJI FlyCart 30 User Manual
56
©
2024 DJI All Rights Reserved.
Installing the Intelligent Flight Battery
Install the two batteries as shown in the diagram. Press down the battery until you hear two
clicks.
Checking the battery level: Press the power button once.
Power on/o: Press once, then press and hold the power button.
Activating the Aircraft
Power on the aircraft and remote controller, then launch DJI Pilot 2 and follow the on-screen
instructions to activate the aircraft.
DJI Pilot 2 App
• Make sure the battery is rmly mounted. Make sure the battery is powered o during
installation.
• To remove the battery, press the battery buckle and lift the battery.
• To fold the frame arms, fold the M1 and M2 frame arms before folding M3 and M4.