dji GOGGLES 3 - Page 36

DJI Goggles 3 User Manual
36
©
2024 DJI All Rights Reserved.
• Make sure to follow all the steps to update the rmware, otherwise the update may
fail.
• The rmware update will take several minutes. It is normal for the screen to turn o or
the goggles to restart automatically during the update. Wait patiently for the rmware
update to complete.
• Make sure the computer is connected to the internet during the update.
• Make sure the device has sucient power before updating the rmware.
• Do not unplug the USB-C cable during the update.
• Note that the update may reset the parameters. Before updating, take note of your
preferred settings and recongure them after the update.
Visit the following link and refer to the Release Notes for rmware update information:
https://www.dji.com/goggles-3/downloads