dji GOGGLES 3 User Manual

DJI Goggles 3 User Manual
10
©
2024 DJI All Rights Reserved.
3. Put on the goggles after the devices are powered on.
4. Rotate the headband adjustment knob on the battery compartment to adjust the length of
the headband. Rotate clockwise to tighten the headband and counterclockwise to loosen the
headband. It is recommended to wear the goggles with the battery compartment placed on
the upper back part of the head to avoid it sliding down.
56~72 mm56~72 mm
Getting Clear Vision
Rotate the knobs on the bottom of the goggles to adjust the diopters if your vision is in the
range of -6.0D to +2.0D. The screen in the goggles will display the diopter value when rotating.
1. Rotate both the knobs in the direction as shown to unlock them. Once unlocked, the knobs
will pop out.
2. Slide left and right to adjust the distance between the lenses until the image is properly
aligned.

dji GOGGLES 3 Specifications

General

Field of View	51°
Interpupillary Distance Range	56-72 mm
Video Recording Max Bitrate	50 Mbps
Resolution	1920x1080 per eye
Refresh Rate	100Hz
Screen Size (Single Screen)	0.49 inches
Operating Frequency	2.400-2.4835 GHz; 5.725-5.850 GHz
Wi-Fi Protocol	802.11 b/g/n/ac
Wi-Fi Operating Frequency	2.4GHz, 5.8GHz
Bluetooth Transmitter Power (EIRP)	<10dBm
Video Recording Format	MOV (H.264)
Supported Video and Audio Playback Formats	MP4, MOV (H.264/H.265)
Operating Temperature	-10°C to 40°C
Power Input	USB-C, 5V/2A
Supported SD Cards	microSD
Charging Time	2 hours
Compatibility	DJI Air 3
Connectivity	USB-C
Wi-Fi Transmitter Power (EIRP)	2.4GHz: <20dBm; 5.8GHz: <14dBm
Latency	With DJI Avata 2: 24 ms; With DJI Air 3: 24 ms; With DJI Mini 4 Pro: 24 ms