dji Matrice 100 - Page 23

©
2015 DJI. All Rights Reserved.
23
DJI MATRICE 100 User Manual
The quick-release mount of the DJI Zenmuse X3 Gimbal with Camera allows you to attach and detach
the camera with ease. Follow the instructions below:
Mounting the Gimbal and Camera:
1. Remove the Gimbal Cover.
2. Rotate the Gimbal Lock to the unlocked position. Insert the gimbal by aligning the white marks on
the gimbal and Gimbal Lock.
3. Rotate the Gimbal Lock back to the locked position. Ensure the gimbal is locked securely.
Ensure the Micro SD card is inserted into the camera.
Removing the Gimbal and Camera:
While holding the upper part of the gimbal, rotate the Gimbal Lock to the unlocked position to remove
the gimbal.
Locked
Gimbal Connector
Mounting Place
Gimbal Lock
Gimbal Cover
2
1
3