dji Matrice 100 - PC Assistant Tools for Firmware Updates

©
2015 DJI. All Rights Reserved.
51
DJI MATRICE 100 User Manual
Tools Page
Check the rmware version and click the hyperlink to update the rmware.
Update the rmware of the extra Intelligent Flight Battery as follows:
a. Turn off all Intelligent Flight Batteries.
b. Insert the battery that needs a rmware update into the battery compartment that is connected to
the ight controller.
c. Turn on the Intelligent Flight Batteries. Click the hyperlinks to update the rmware.
Update the remote controller rmware via the DJI Pilot app. Refer to Updating the Firmware (P64) for
details.
The remote controller may become unlinked from the aircraft after the rmware update. Re-
link the remote controller to the aircraft if necessary.
It is normal for the aircraft to make sounds or its LEDs to ash during the rmware update.
If you are using the DJI Zenmuse X3 Gimbal with Camera, update all rmware using the
rmware update package. Refer to Updating the Firmware (P64) for details.