EasyManua.ls Logo

dji MATRICE 200 series

dji MATRICE 200 series
140 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
24
©
2018 DJI All Rights Reserved.
MATRICE 200
Series User Manual
Use the Failsafe RTH for example:
1. Record Home Point 2. Remote Control Signal Lost
-BOEJOH"GUFS6TFS$POmSNBUJPO
3. Signal Lost for Extended Time
4. RTH (Adjustable Altitude)
Height over HP<=Failsafe Altitude
)FJHIUPWFS)1'BJMTBGF"MUJUVEF
Elevate to Failsafe Altitude
Failsafe Altitude
Hovering at 0.7 meters above the Home Point
Aircraft cannot return to the Home Point when GPS signal is weak ( [ ] Less than 4
bars is considered a weak GPS signal) or unavailable.
User cannot control the aircraft while the aircraft is ascending to 65 feet (20 meters) from
the current altitude. However, users can press the RTH button once to exit ascending and
regain control.
5IFBJSDSBGUXJMMBVUPNBUJDBMMZEFTDFOEBOEMBOEJG35)JTUSJHHFSFEXIFOUIFBJSDSBGUnJFT
within a 65 feet (20 meters) radius of the Home Point. The aircraft will stop ascending and
will return to the Home Point if the aircraft reaches 65 feet (20 meters) in altitude or beyond
during Failsafe.
The aircraft cannot avoid obstacles during Failsafe RTH if the Forward Vision System is
EJTBCMFE*UJTJNQPSUBOUUPTFUBTVJUBCMF35)"MUJUVEFCFGPSFFBDInJHIU-BVODI%+*(0
enter camera and tap
to set Failsafe Altitude.
Failsafe Safety Notices
The aircraft cannot avoid obstacles during Failsafe RTH when the
Forward Vision System is disabled. Therefore, it is important to set a
TVJUBCMF'BJMTBGFBMUJUVEFCFGPSFFBDInJHIU-BVODIUIF%+*(0BQQ
enter Camera and tap
to set the Failsafe Altitude.
N
*GUIFBJSDSBGUJTnZJOHVOEFSGFFUNFUFSTBOE'BJMTBGFJODMVEJOH
Smart RTH, Lower Battery RTH) is triggered, the aircraft will first
automatically ascend to 65 feet (20 meters) from the current altitude. You
can only cancel the ascending by exiting the Failsafe.
N
H
The aircraft automatically descends and lands if RTH is triggered when
UIFBJSDSBGUnJFTXJUIJOBGPPUNFUFSSBEJVTPGUIF)PNF1PJOU5IF
aircraft will stop ascending and immediately return to the Home Point if
ZPVNPWFUIFMFGUTUJDLXIFOUIFBJSDSBGUJTnZJOHBUBOBMUJUVEFPGGFFU
meters) or higher and Failsafe is triggered.
The aircraft cannot return to the Home Point when GPS signal is weak
( [
] displaying less than four bars) or is unavailable.

Table of Contents

Other manuals for dji MATRICE 200 series

Related product manuals