DJI Mavic 3 User Manual
19
©
2021 DJI All Rights Reserved.
Landing Protection
Landing Protection will activate during Smart RTH. When aircraft begins landing, Landing Protection is
enabled.
1. During Landing Protection, the aircraft will automatically detect and carefully land on suitable ground.
2. If the ground is determined unsuitable for landing, the aircraft will hover and wait for pilot
conrmation.
3. If Landing Protection is not operational, DJI Fly will display a landing prompt when the aircraft
descends below 0.5 m. Pull down on the throttle stick or use the auto landing slider to land.
Precision Landing
The aircraft automatically scans and attempts to match the terrain features below during RTH. The
aircraft will land when the current terrain matches the Home Point. A prompt will appear in DJI Fly if the
terrain match fails.
Landing Protection is activated during Precision Landing.
The Precision Landing performance is subject to the following conditions:
a. The Home Point must be recorded upon takeoff and must not be changed during flight.
Otherwise, the aircraft will have no record of the Home Point terrain features.
b. During takeo, the aircraft must ascend at least 7 m before ying horizontally.
c. The Home Point terrain features must remain largely unchanged.
d. The terrain features of the Home Point must be sufficiently distinctive. Terrain such as snow-
covered areas are not suitable.
e. The lighting conditions must not be too light or too dark.
The following actions are available during Precision Landing:
a. Press the throttle stick down to accelerate landing.
b. Move the control sticks in any direction apart from the throttle direction to stop Precision Landing.
The aircraft will descend vertically after the control sticks are released.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
