EasyManuals Logo

dji Mavic 3 User Manual

dji Mavic 3
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #30 background imageLoading...
Page #30 background image
DJI Mavic 3 User Manual
29
©
2021 DJI All Rights Reserved.
Use the gimbal dial on the remote controller to control the tilt of the camera. Alternatively, enter the
camera view in DJI Fly. Press the screen until an adjustment bar appears and drag up and down to
control the tilt of the camera.
Gimbal Operation Modes
Two gimbal operation modes are available. Switch between the dierent operation modes in DJI Fly.
Follow Mode: The angle between the gimbal’s orientation and aircraft front remains constant at all times.
FPV Mode: The gimbal synchronizes with the movement of the aircraft to provide a rst-person ying
experience.
Do not tap or knock the gimbal when the aircraft is powered on. To protect the gimbal during takeo,
take o from open and at ground.
Precision elements in the gimbal may be damaged in a collision or impact, which may cause the
gimbal to function abnormally.
Avoid getting dust or sand on the gimbal, especially in the gimbal motors.
A gimbal motor may enter protection mode in the following situations:
a. The aircraft is on uneven ground or the gimbal is obstructed.
b. The gimbal experiences excessive external force, such as during a collision.
DO NOT apply external force to the gimbal after the gimbal is powered on. DO NOT add any extra
payload to the gimbal as this may cause the gimbal to function abnormally or even lead to permanent
motor damage.
Make sure to remove the storage cover before powering on the aircraft. Also, make sure to mount
the storage cover when the aircraft is not in use.
Flying in heavy fog or clouds may make the gimbal wet, leading to temporary failure. The gimbal
recovers full functionality once it is dry.
Gimbal Axes Lock
For more convenient storage, the gimbal axes will automatically lock after the aircraft is powered o and
unlock when it is powered on again. No user operation is required.
-90°
35°
Gimbal and Camera
Gimbal Prole
The 3-axis gimbal of DJI Mavic 3 provides stabilization for the camera, allowing you to capture clear and
stable images and video. The control tilt range is -90° to +35°.

Other manuals for dji Mavic 3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the dji Mavic 3 and is the answer not in the manual?

dji Mavic 3 Specifications

General IconGeneral
TypeQuadcopter
Product colorBlack
Maximum speed19 m/s
GPS (satellite)Yes
Number of rotors4 rotors
Maximum tilt angle35 °
Hovering time (max)40 min
Maximum flight time46 min
Maximum ascent speed8 m/s
Maximum descent speed6 m/s
Maximum weight capacity- kg
Maximum wind resistance12 m/s
Maximum operating distance30000 m
Maximum pitch angular velocity200 °/sec
USB ports quantity2
Operating frequency2400000 MHz
Battery voltage15.4 V
Battery capacity5000 mAh
Megapixel20 MP
Sensor typeCMOS
Video resolutions1920 x 1080, 3840 x 2160, 4096 x 2160 pixels
Maximum frame rate120 fps
Camera shutter speed8 - 1/8000 s
Image formats supportedDNG, JPEG
Video formats supportedH.264, H.265
Maximum image resolution5280 x 3956 pixels
Maximum video resolution5120 x 2700 pixels
Field of view (FOV) angle84 °
Operating temperature (T-T)-10 - 40 °C
Internal memory8 GB
Compatible memory cardsMicroSD (TransFlash)
Built-in processor-
Moving control functionsBackward, Downward, Forward, Upward
Weight and Dimensions IconWeight and Dimensions
Depth221 mm
Width96.3 mm
Height90.3 mm
Weight895 g
Battery weight335.5 g

Related product manuals