DJI Mavic 3 User Manual
43
©
2021 DJI All Rights Reserved.
Optimal Transmission Zone
Strong
Weak
Weak
DJI Fly
App
Flight Pause/RTH Button
Press once to make the aircraft brake and hover in place. If the aircraft is performing Smart RTH or auto
landing, press once to exit the procedure and then brake.
Press and hold the RTH button until the remote controller beeps to start RTH. Press this button again to
cancel RTH and regain control of the aircraft. Refer to the Return to Home section for more information
about RTH.
Customizable Button
Go to System Settings in DJI Fly and select Control to customize the function of the button. Functions
include recentering the gimbal, switching the auxiliary LED, and toggling the map and live view.
Remote Controller Alert
The remote controller sounds an alert during RTH or when the battery level is low (6% to 15%). The low
battery alert level can be cancelled by pressing the power button. The critical battery level alert (less
than 5%), however, cannot be cancelled.
Optimal Transmission Zone
The signal between the aircraft and the remote controller is most reliable when the antennas are
positioned in relation to the aircraft as depicted below.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
