DJI Mavic 3M User Manual
21
©
2023 DJI All Rights Reserved
.
The aircraft will land automatically if the current battery level can only support the aircraft
long enough to descend from its current altitude. Auto landing cannot be canceled but the
remote controller can be used to alter the horizontal movement and the speed of descent
of the aircraft during landing. If there is sufficient power, the throttle stick can be used to
make the aircraft ascend at a speed of 1 m/s.
During auto landing, move the aircraft horizontally to find an appropriate place to land as
soon as possible. The aircraft will fall if the user keeps pushing the throttle stick upward
until the power is depleted.
The illustration shown below is the Battery Level Indicator Bar located at the top bar of
the DJI Pilot 2 app. Refer to the Top Bar section in the DJI Pilot 2 app chapter for more
information.
Battery Level Warning Implication Flight
Low Battery RTH
The remaining
battery level is only
enough for the
aircraft to fly to the
Home Point safely.
If RTH is selected, the aircraft will fly to
the Home Point automatically and landing
protection will be enabled. Users can regain
control of the aircraft and land it manually
during RTH.
The warning will not appear again after
choosing not to use RTH. Decide carefully
and ensure flight safety.
Auto Landing
The remaining
battery level is only
enough for the
aircraft to descend
from its current
altitude.
The aircraft will land automatically and
landing protection will be enabled.
Estimated Remaining
Flight Time
The estimated
remaining flight
time of the aircraft
is based on its
current battery
level.
/
Low Battery Level
Warning
Tap
> in
camera view to
set the low battery
level threshold
value.*
Long beeps will sound from the remote
controller. The user can still control the
aircraft.
12:29
H
Remaining ight time
Sufcient battery
level (Green)
Power required to
return home (Yellow)
Critical Low battery
level warning
Low battery
level warning
Auto landing (Red)