dji Mavic 3M - Page 65

DJI Mavic 3M User Manual
65
©
2023 DJI All Rights Reserved
.
a. Photo mode includes single, timed, and panorama (only RGB) shots.
b. Different resolution options are available when shooting videos, recording at
3840×2160 (only RGB) and 1920×1080 are supported.
8. Shutter/Record Button: tap to take a photo or start or stop recording.
9. Playback: tap to view and download photos or videos stored on the aircraft microSD card.
10. Adjust Zoom: Tap or drag to adjust the zoom of the RGB camera.
11. AR Projection: project information such as PinPoints, waypoints, and the home point in the
camera view to improve flight situation awareness. Refer to the AR Projection section for
more details.
12. Navigation Display: displays the aircraft flight speed, altitude, orientation, home point
information, etc. Refer to the Navigation Display section for details.
13. Map View: tap to display the map view on the screen, and locations can be searched.
Users can maximize or minimize the map view.
14. Camera View Switch: tap to switch between RGB and multispectral camera view.
15. POI: tap to enable the POI mode. Refer to the POI section for more information.
16. PinPoint: tap to add the current aircraft location as a PinPoint. Tap and hold to open the
PinPoint setting menu. Refer to the PinPoint section for more details.
17. Gimbal Mode: tap to recenter gimbal or tilt gimbal down.
18. Look At: after selecting a PinPoint, users can tap the Look At icon, and the camera will face
the PinPoint.
19. File Upload to Cloud Status: displays the file upload status from DJI Pilot 2 to the DJI
SmartFarm Platform. Tap to view the details.
20. Flight Route: tap to enter the flight route library. Users can create and view all flight tasks
and more.