©
2021
DJI All Rights Reserved.
13
Remote Controller Controls
The Matrice 300 RTK remote controller is used as an example below. Adjust the tilt of the gimbal using
the left dial and adjust the pan using the right dial. Press the shutter button or record button to take
photos or record video. Toggle the 5D button to adjust the EV value. The customizable C1 button can
be used to recenter the gimbal and the customizable C2 button can be used to switch between the
main and auxiliary screen.
1
2
3
4
5
7
6
1. Left Dial
Turn to adjust the tilt of the gimbal.
2. Record Button
Press to start or stop recording video.
3. Shutter Button
Press to take a photo. The photo mode can be set to single or interval in DJI Pilot. Single photos
can also be taken during video recording.
4. Right Dial
Turn to adjust the pan of the gimbal.
5. 5D Button
The default functions of the 5D button are listed below and can be customized in DJI Pilot.
Left: Decrease EV value
Right: Increase EV value
6. Customizable Button C2
The default function is to switch between the main and auxiliary screen. The function for this button
can be customized in DJI Pilot.
7. Customizable Button C1
The default function is to recenter the gimbal. The function for this button can be customized in DJI
Pilot.
To Next Page
Loading...
