DMA MPS49 - Page 47

CM170407AMA
g) Airsp. low.tol: -5;
h) Airsp. rate: 300;
i) Stab. time: 90;
j) Leak test: Off
8. Press the orange button Back.
9. Select step 2 and touch the yellow button Edit.
10. Touch the yellow button Copy and confirm. The values from step 1 will be copied
into step 2.
11. Change the only value that differ between the two steps:
a) Altitude: 0.
12. Press the orange button Back.
13. Select step 3 and touch the yellow button Edit.
14. Copy the values from the previous step and edit them. Repeat for steps 4 and 5.
15. After entering all the data, press the orange button Back to leave the profile editing
menus.
16. Confirm saving the profile.
D.Marchiori Copyright 47