DMP Electronics CellCom LTE-V Series User Manual

CellCom‑LTE‑V Programming and Installation Guide Digital Monitoring Products
13
REMOTE ARMING AND DISARMING
Virtual Keypad App
Using a smartphone with the DMP Virtual Keypad App or a computer with VirtualKeypad.com, you can connect to the
communicator to arm areas, turn outputs on and off, and add, edit, or remove users. See Figure10.
Using Outputs to Arm and Disarm
A burglary control panel zone may be programmed as an arming zone and connected to output O1 or O2. See
Figure11. Program the output number in armed output or remote arming output in output options when programming
the communicator. See Armed Output or Remote Arming Output. The communicator output connections can be used
with any of the applications listed in this guide. See Applications.
Figure 10: Virtual Keypad Application
Figure 11: Communicator to Burglary Control Panel Zones
Use 18-22 AWG for
Power Supply connection
O1 O2
12VDC Aux. Output
+
-
Control Panel
MODEL CellCom-LTE-V
PROG
+12 G Z1 Z2 Z4-Z4+GZ3 RTO2O1
RB
GND
Zone 1
Zone 2
Control Panel EOL resistor

DMP Electronics CellCom LTE-V Series Specifications

General

Brand	DMP Electronics
Model	CellCom LTE-V Series
Category	Cell Phone
Language	English