Digital Monitoring Products
CellCom‑LTE‑V
Programming and Installation Guide
14
PROGRAMMING
Before You Begin
Read this guide before you begin programming. This guide allows you to quickly learn the programming options
and operational capabilities of the CellCom‑LTE‑V communicator. The communicator contains all of its programming
information in an on‑board processor and does not require an external programmer.
In addition to this manual, you should also be familiar with the following document:
• CellCom‑LTE‑V Series Universal Alarm Communicator User Sheet (LT‑1819)
• CellCom‑LTE‑V Series Universal Alarm Communicator Programming Sheet (LT‑1818)
Programming Sheet
Fill out the programming sheet included with this device before you begin programming. The programming sheet lists
the various options available for programming the communicator and allows you to keep a record of what options you
intend to enter, reducing programming errors.
Getting Started
Initializing the Communicator
When programming a communicator for the first time or rewriting the entire program of an existing communicator,
use the initialization programming option. See Initialization. Initializing clears the communicator’s memory and sets
the highest user number to user code 99.
Accessing the Programmer
To access the programmer function of the
communicator
:
1. Connect the keypad to the programming header.
2. Press and release the reset button.
3. Enter 6653 (PROG). The keypad displays PROGRAMMER.
Programming Menu
The following is a list of programming menu options available in the programming menu. Press CMD to advance
through the programming menu options. To select a menu option, press any select area when the desired menu
option displays on the keypad. Use this list to navigate to your desired programming menu option in this guide.
• Initialization
• Communication
• Remote Options
• System Reports
• System Options
• Output Options
• Area Information
• Zone Information
• Stop
• Set Lockout Code
To Next Page
Loading...
Need help?
General
