To Next Page

To Previous Page

CellCom‑LTE‑V

Programming and Installation Guide Digital Monitoring Products

INITIALIZATION

This option allows you to set the communicator’s programmed memory back to the factory

defaults in preparation for system programming.

After selecting YES to clear a section of memory, the communicator asks if you are sure

you want to clear the memory. This is a safeguard against accidently erasing part of your

programming. No memory is cleared from the programming until you answer YES to the

confirmation prompt. See Figure14.

CLEAR ALL CODES

Choose NO to leave existing codes intact.

Choose YES to clear the user code memory and assign user code number 99 to user20.

CLEAR ALL SCHEDULES

Choose NO to leaves existing schedules intact.

Choose YES to clears all schedules from the programming.

CLEAR EVENTS

Choose NO to leave existing event memory intact.

Choose YES to clear all event memory in the display events buffer.

CLEAR ZONE PROGRAMMING

Choose NO to leave existing zone information intact.

Choose YES to set all zones in the system to *UNUSED*.

CLEAR COMMUNICATION

Choose NO to leave existing communication programming intact.

Choose YES to clear communication to factory defaults.

SET TO FACTORY DEFAULTS

Choose NO to leave the remainder of the existing communicator programming intact.

Choose YES to set the communicator programming back to factory default selections.

Note: Choosing YES does not clear the event memory, zone, user code information, or

schedules.

INITIALIZATION

CODES? NO YES

SURE? YES NO

SCHEDS? NO YES

SURE? YES NO

EVENTS? NO YES

SURE? YES NO

ZONES? NO YES

SURE? YES NO

COMMS? NO YES

SURE? YES NO

DEFAULTS? NO YES

SURE? YES NO

CODES?

NO YES

SCHEDS? NO YES

Use YES/NO options to initialize

programmable parts of the panel.

Choose YES to advance to

a conﬁrmation prompt.

If you choose YES, the panel initializes that section

of the program and advances to the next prompt.

If you choose NO, the panel advances to the next

option and does not initialize that section of the

program.

SURE? YES NO

Choose NO to

advance to the

next option.

Figure 14: Alternating Yes and No Options

Brand	DMP Electronics
Model	CellCom LTE-V Series
Category	Cell Phone
Language	English

DMP Electronics CellCom LTE-V Series User Manual

Table of Contents

Other manuals for DMP Electronics CellCom LTE-V Series

Questions and Answers:

DMP Electronics CellCom LTE-V Series Specifications

Related product manuals