DMP Electronics CellCom LTE-V Series - Z-Wave Information (Cellcomz-LTE-V Only)

CellCom‑LTE‑V Programming and Installation Guide Digital Monitoring Products
37
Z‑Wave Information (CellComZ‑LTE‑V only)
CellComZ‑LTE‑V communicators are security enabled Z‑Wave products and are designed to be used as primary
controllers. The XFER feature allows an existing 3rd party network to be transferred into the communicator.
The communicator can support Z‑Wave products from different vendors and product categories. It is recommended
to use DMP devices for best performance.
Z‑Wave terminology:
• Inclusion is the process of adding a device to the Z‑Wave network. The new device is ‘included’ into the Z‑Wave
network.
• Exclusion is the process of removing a device from the Z‑Wave network. The new device is ‘excluded’ from the
Z‑Wave network.
• Replication is the process of copying network information to another device (typically a Z‑Wave controller) in
the Z‑Wave network.