3
Internet Radio Quick start Guide
Thanks for your buying! We are sure that it will provide you with years of enjoyment and reliable service.
What you need before you can use your Internet radio?
A broadband Internet connection.
A wireless access point (Wi-Fi) connected to your broadband Internet, preferably via a router.
If your wireless network is configured to use Wired Equivalent Privacy (WEP) or Wi-Fi Protected
Access (WPA) data encryption then you need to know the WEP or WPA code so you can get the
Internet Radio to communicate with the network.
If your wireless network is configured for trusted stations you will need to enter the Radio‟s MAC
address into your wireless access point.
To find the Radio’s MAC address, need 3 steps:
1. Press , and then press or to <Information Center>, press to confirm.
2. Press or to <System Information>, press to confirm, and it is done!
3. Press or to <Wireless Info>, press to confirm, and you will get it!
To enter the MAC address into your wireless access point, read the instructions supplied with the
wireless access point maybe necessary.
Note: Before continue, make sure that your wireless access point is powered up and connected to your
broadband Internet.
To Next Page
Loading...
