38
DC-ITD-CL1andCL2MAN01-2018.A www.dodtec.com
NOV 2018 815-788-5200
CL1 Light Extension Cable w/connectors - up to 100' - Specify Length
Outdoor Rain Resistant End of Line Cone
Option CL1 Split Sampling System
CL1 Explosion Safe (Zone 2) Light Tower Option Top Mount
KIT Duct Mounting Adaptor for 1/4" Tubing
KIT Duct Mounting Adaptor for 3/8" Tubing
Disposable non-corrosive end of line particulate filters
(for Phosgene & Hydride units – 8 required)
Filter Housing for use with Teflon membranes (each)
(for Mineral Acid Units – 1 required)
Teflon Membranes – 100 pieces – 47mm
(for use with Part #60009)
Assembly - CL1 Upper Fitting and Filter
(replaces part number 2-100-A63)
Teflon Membranes – 10 pieces – 47mm
(for use with Part #60009)
Filter Media Disc for Dusty Diisocyanate Application
(10/pack) (for use with Part #2-600-217)
Particulate Filter for use with Corrosive gases (recommended replacement
every 90 days or less)
NOTE: All applications except Diisocyanates – 150’ Maximum Sample Length. Diisocyanates – 6” Maximum -
Sold in 100-foot increments
Spare Parts for CL1/CL2 Description
Fuse 3.15A Slow Blow 5X20MM
Power Supply 5V, 12V, -12V
Assy Filter Housing for Corrosive Gases
Teflon Membranes for 60009 - 100Pk - 47mm
Tubing 5/32 x 3.31 Black PVC (Transducer Tubing)
CL1 & CL8 Gate Open Assy with Cam
CL1 & CL8 Tape Advance Assy
CL1 Optics Back Plate with Sealing Foam
Assy CL1 Light w/Pole for Light Option w/6 Pin Connector