DOD Technologies ChemLogic 1 - Page 50

50
DC-ITD-CL1andCL2MAN01-2018.A www.dodtec.com
NOV 2018 815-788-5200
CL1 & CL2 Manual
Formatting the disk in the CL1/CL2
Figure 2.1
Insert the Micro SD card into the slot.
Wait 5 seconds for the drive to initialize.
Hold in both the “UP” arrow and ‘DOWN’
arrow at the same time which should bring
up the screen in figure 2.2.
Figure 2.2
Use the down arrow key to scroll down until
you see the menu item “Removable Media”
as shown in figure 2.3
Figure 2.3
Press the <ENTER> key to select
“Removable Media” - this will display the
contents of the Micro SD card (screen may
look slightly different as shown in figure 2.4)
Figure 2.4
Press the softkey on the lower right side
which will bring up the screen shown in
figure 2.5
Figure 2.5
Press <F3> to format the disk which will
bring up the screen shown in figure 2.6.
Figure 2.6
Press the <ENTER> key to begin the format.
A Clock face pops up and minute hand
rotates till complete (several minutes).
When complete press <ESC> several times
to return the CL1/CL2 Main Menu.