2. Push and release the down arrow button to
scroll downward through the main menu to “Vehicle
Info.”
3. Push and release the right
arrow button to
access the ”Oil Life” screen.
4. Push and hold the OK button to reset oil life. If con-
ditions are met, the gauge and numeric display will
update to show 100%. If conditions are not met a
pop-up message of "To reset oil life engine must be
off with ignition in run” will be displayed (for five
seconds), and the user will remain at the Oil Life
screen.
5. Push and release the up
or down arrow
button to return to previous main menu.
NOTE:
If the indicator message illuminates when you start the
vehicle, the oil change indicator system did not reset. If
necessary, repeat this procedure.
Secondary Method Of Resetting Engine Oil Life
1. Without pressing the brake pedal, push the ENGINE
START/STOP button and place the ignition to the
ON/RUN position (do not start the engine).
2. Fully press the accelerator pedal, slowly, three times
within ten seconds.
3. Without pushing the brake pedal, push the ENGINE
START/STOP button once to return the ignition to the
OFF position.
NOTE:
If the indicator message illuminates when you start the
vehicle, the oil change indicator system did not reset. If
necessary, repeat this procedure.
PERFORMANCE SHIFT INDICATOR
(PSI) — IF EQUIPPED
The PSI is enabled on vehicles with manual transmis-
sion, or when a vehicle with automatic transmission is
in manual shift mode. The PSI provides the driver with a
visual indication within the instrument cluster display
when the driver configured gear shift point has been
reached and the driver is still accelerating. This indica-
tion notifies the driver to change gear corresponding to
the configured RPMs in the head unit.
INSTRUMENT CLUSTER DISPLAY
SELECTABLE MENU ITEMS
Push and release the up or down arrow button
until the desired Selectable Menu item is displayed in
the instrument cluster display.
Follow the Menu or submenu prompts as desired.
Speedometer
Push and release the up or down arrow button
until the speedometer menu is displayed in the instru-
ment cluster display. Push and release the OK button to
toggle units (km/h or mph) of the speedometer.
Vehicle Info
Push and release the up
or down arrow button
until the “Vehicle Info” menu is displayed in the instru-
ment cluster display. Push and release the right
or
left
arrow button to scroll through the submenus
items of “Vehicle Info.”
Follow the directional prompts to access or reset any of
the following “Vehicle Info” submenu items:
Tire Pressure Monitor
If tire pressure is OK for all tires, a vehicle ICON is dis-
played with tire pressure values in each corner of the
ICON.
If one or more tires have low pressure, “Inflate Tire To
XX” is displayed with the vehicle ICON and the tire pres-
sure values in each corner of the ICON with the pres-
sure value of the low tire are displayed in a different
color than the other tire pressure value.
If the Tire Pressure system requires service, “Service
Tire Pressure System” is displayed.
Tire PSI is an information only function and cannot be
reset
page 147.
Coolant Temp
•
Displays the actual coolant temperature.
Trans Temp
•
Displays the actual transmission temperature.
Oil Temp
•
Displays the actual oil temperature.
Oil Pressure
•
Displays the actual oil pressure.
Oil Life
To reset the Oil Life, you must hold the OK button. The
“Hold OK to Reset” instruction will be displayed at all
times, but the following conditions will need to be met
in order to reset Oil Life:
•
The vehicle must be off
•
The ignition must be in the ON/RUN position
If the conditions are met, holding the OK
button will reset
the gauge and the numeric display will return to 100%.
54 GETTING TO KNOW YOUR INSTRUMENT PANEL
5548538-23_LA_OM_EN_USC_t_E2.pdf 54 4/7/2023 2:38:35 PM
To Next Page
Loading...
