Structure and Operation
D760.H03E-001.H1907 103
Background
Click "background" to enter the background setting interface. Under this function,
the user can set the background. There are two backgrounds available.
Key tone
Click [key tone] to enter the setting interface of key tone. Under this function, the
user can set the key tone.
Voice
Click [sound] to enter the sound setting interface. Under this function, the user
can set the sound of the display screen.
Sound and balanced
Click "sound balance" to set the sound effect. There are seven modes: soft, rock,
pop, live, dance, classical and custom, among which the user can adjust the mode by
himself.
Sound balance
Click "sound balance" to adjust the output intensity of the speaker in each posi-
tion. When the adjustment point is in the center of the screen, the output intensity of
each speaker is the same. If the adjustment point is placed in the corresponding posi-
tion on the diagram, the sound intensity of the corresponding position on the vehicle
becomes stronger, while other areas become weaker.
Volume comfort
The volume comfort value is supported by 40 volume levels. When the comfort
switch is turned on, such as the volume value of the current adjustment ≥ the comfort
value, the adjusted volume value will be played during the ignition. But when the ACC
OFF is restarted, the system volume value will be changed to the set comfort value. If
the volume currently adjusted is less than or equal to the comfort value, the system
will save the adjusted value no matter what state it is in.
Language
The system supports Chinese and English languages for users to switch, default
is Chinese.
Bluetooth
Bluetooth is named DFCV-BT, the name can be edited, the maximum support for
20 characters of the setting, more than the length of the byte can not be entered. The
default matching password is 0000, editable, with a maximum length of 6 digits. Blue-
tooth supports PIN and SSP authentication. The default is SSP authentication. When
bluetooth connection does not support SSP authentication, it can automatically switch
to PIN authentication. When the bluetooth switch is turned on, the paired device is
automatically connected when it enters the connectable range.
To Next Page
Loading...